35 19MM RED

Scotch® Vinyl Electrical Tape 35 Data Sheet November 2017 Description Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) colorcoding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C). This tape is available in nine fade resistant colors. Agency Approvals & Self Certifications UL Listed - UL 510 Standard “Insulating Tape” (product category OANZ), File E129200; meets UL 510 labeling for “flame-retardant” for vinyl electrical tape. CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR 48769. RoHS 2002/95/EC RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M. Applications  Color coding for phase identification, job identification and safety  Insulating electrical wiring  Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather Installation  Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.  On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.  Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging. Specifications Scotch® Tape 35 is based on polyvinyl chloride (PVC) and/or its copolymers and has a rubber-based, pressure-sensitive adhesive. The tape shall be 7 mils thick, and be UL Listed and marked per UL Standard 510 as “Flame-Retardant.” The tape shall be compatible with synthetic cable insulations, jackets and splicing compounds. The tape will remain stable and will not telescope more than 0.1 inches when maintained at temperatures below 122°F (50°C). 1 of 2  Scotch® Vinyl Electrical Tape 35 Typical Properties Not for specifications. Values are typical, not to be considered minimum or maximum. Properties measured at room temperature 73°F (23°C) unless otherwise stated. Physical Property (ASTM D1000, unless noted) Color(s) Typical Value US units (metric) Blue, Brown, Gray, Green, Orange, Red, Violet, White, Yellow, and Pink Adhesive Pressure-sensitive rubber Thickness 7 mils (0,178 mm) Continuous Operating Temperature (max) 221ºF (105ºC) Breaking Strength 17 lb/in (30,3 N/10 mm) Elongation (% at break) 225% Adhesion to Steel 20 oz/in (2,2 N/10 mm) Adhesion to Backing 20 oz/in (2,2 N/10 mm) Flagging 0.1 in (2,5 mm) Electrical Property (ASTM D1000, unless noted) Typical Value US units (metric) Voltage Rating (UL 510) Dielectric Breakdown Standard condition Wet Condition (96 hrs @ 73.4ºF (23ºC) 600 volts 8,750 volts* 7875 volts *Note: Dielectric strength 1250 V/mil High Humidity Insulation Resistance > 1x 106 megohms Shelf Life & Storage Scotch® Vinyl Electrical Tape 35 has a 5-year shelf life from date of manufacture when stored in a humidity controlled storage (10°C/50°F to 27°C/80°F and